How to Build a Water Wheel Pump

Published: 14th September 2009
Views: N/A

Individuals had constructed water wheel pumps not only to handle water flow but also to create power to cut lumber and processed grain. These pumps are usually utilized to ensure continuous water access to an area where potable H2O is not available.


The materials needed are wooden boards or cardboard, pens and pencil, hot glue, buckets and wooden skewer.


The tools needed are nails, hammer, sewing pins, protractor, scissors and ruler.


Before beginning the construction of your project, carefully create the structure that you want for your project. Utilize board planks or cardboard for this plan. Create a line at an overall distance of two inches from the end of one of the plans and cut this into ten equal parts. These will serve as the paddles of your project. Create a pair of circles with the help of the protractor.

The middle of the pair of circles will serve as the points where you need to place the axle the two facets of the set-up that you are creating. You should consider the overall size of your project when marking these parts because you do not want to have a wheel that does not have a good balance. It is vital that you correctly get these needed measurements. Create the support for your wheel.

This is the least tedious part of the whole project. It is up to you how much height does you want it to have. The standard shape is to have a pair of big triangles supported with a beam. You can also install another base for additional strength. The wheel will be installed into the notches in the stand. The boards that you have previously placed a mark need to be carefully divided with a saw.

The wooden paddles that you have previously created needed to be installed at a 40° angle from the pair of wheels. Install the paddles into position with the help of glue. Install the skewer in the middle to connect the parts of the set-up. Install the wheel on its stand.

If you want to use the set-up as an H20 supply depot for your yard, you may need to construct a larger one. You can place pails to the axle of the wheel and see if it will help its overall performance. You now have a wheel that is ready to supply H2O.


You must remember that the main goal of the wheel that you construct will determine how big it will be. Check if the stand is stable enough to support the wheel. You should carefully use each tools and wear safety gloves to avoid any unnecessary accidents.Please click these links if you want to know more about how to build a water wheel pump or how to build a water wheel pump in general.

Report this article Ask About This Article

More to Explore